Over 100 five-star Google reviews
    07 3180 8041
    Handover (PCI) Inspection · Brisbane

    Handover (PCI) Inspections in Brisbane

    Your handover inspection is the last check before the final payment and the keys. We inspect new homes across Brisbane, from Carindale and Parkinson in the south to Brighton, Sandgate and the bayside in the north, as well as infill and knock-down rebuilds in established suburbs. Every VG Inspect inspector is a licensed builder who has built more than 300 homes, and your photo report is sent to you on site, before we leave, with every item referenced to the QBCC Standards and Tolerances Guide, the NCC or the relevant Australian Standard.

    Book an Inspection

    Handover (PCI) Inspection from $660 · Same-day digital report · QBCC Licence 1318443 · Call 07 3180 8041

    What we find at handover in Brisbane and SEQ

    Across 85 new SEQ homes we inspected at handover (including 27 in Brisbane), the median home had 11 defects.

    • 74% had paint issues (coverage, touch-ups, finish)
    • 62% had roof/gutter or tiling and silicone defects
    • Almost half still had incomplete work on the day the builder called it complete

    Brisbane figures roll up into our South East Queensland reports, 2026. We'll show Brisbane-suburb figures as each suburb reaches enough inspections to stay anonymous.

    What's different in Brisbane

    • Knock-down rebuilds and small lots: Tight side setbacks mean damage to neighbouring fences, cladding and gutters during the build. We record it before you take the keys.
    • Older streets, new stormwater: On infill lots we check that downpipes actually connect to the legal point of discharge, and that the ground falls away from the slab.
    • Summer storms: We check roof sheeting, flashings and gutter falls closely, because Brisbane's storm season tests them in the first year.
    • Two-storey and townhouse builds: Balustrade heights, stair dimensions and upper-floor wet areas get extra attention.

    From our recent Brisbane inspections

    Carindale · handover

    Handover inspection in Carindale — every defect recorded before the keys changed hands.

    Instagram
    Brighton · handover

    Window frame scratches in Brighton, measured against the QBCC 1.5 m viewing rule.

    Instagram
    Sandgate · handover

    A sharp tile arris flagged at a handover inspection in Sandgate.

    LinkedIn

    More finds like these on our handover (pci) inspection page.

    The rule behind it

    Brick mortar joints are uniform

    Mortar joints are tooled to a consistent width and the brickwork is cleaned of excess mortar and smears, so the finished wall matches the approved sample.

    QBCC Standards & Tolerances Guide, Table 4.4

    Roofs have to shed water

    Roof sheeting is laid to at least the manufacturer's minimum pitch, with flashings and gutter falls set so stormwater drains clear — a common first-summer failure when it isn't.

    NCC Housing Provisions / manufacturer specifications

    Why a handover (pci) inspection matters in Brisbane

    The handover/PCI is your last leverage before the final payment — a documented defect list the builder is contractually expected to rectify. Get the date to your inspector early, because builders often give short notice.

    At Brisbane handover we commonly flag paint finish and coverage, tiling lippage and grout and silicone quality, chips and scratches on glass, benchtops and cabinetry, door and window operation and alignment, and plumbing and drainage function, all judged against the QBCC Standards and Tolerances Guide using its viewing-distance rules such as 1.5m for walls.

    Local conditions in Brisbane

    Brisbane's new-build activity runs from the northern suburbs — Aspley, Bracken Ridge, Carseldine and the Fitzgibbon priority development area — out to the bayside east around Wynnum and Manly West. Much of it sits on reactive clay and some on filled or sloping lots, which makes the early slab and frame stages worth getting right. Our builder-inspectors cover the whole metro area and send a same-day photo report referenced to the NCC, the relevant Australian Standards and the QBCC Standards and Tolerances Guide.

    What we check at the handover (pci) stage

    At practical completion, before you sign off and pay the final claim, we check every finished element against the QBCC Standards and Tolerances Guide:

    Finishes & function

    • Paint, plaster, tiling, grout and silicone to the QBCC tolerances
    • Doors, windows and cabinetry operation and alignment
    • Floor, wall and ceiling finishes from a normal viewing position

    Services & external

    • Plumbing, electrical and functional checks
    • External cladding, roof, gutters and drainage
    • Site, paths and any damage before handover

    Every item is photographed and referenced to the relevant Australian Standard, NCC clause or the QBCC Standards and Tolerances Guide, then delivered in a same-day digital report you can hand straight to your builder. See the full handover (pci) inspection details, or read how to choose a new-build inspector in Queensland.

    Other inspection stages across Brisbane

    Most owners book several stages so defects are caught before the next trade covers them. Alongside the handover (pci) inspection, we also inspect across Brisbane:

    Inspection pricing in Brisbane

    Construction stage inspection — from $550Pre-pour, slab, frame, pre-plaster (lock-up) and waterproofing inspections. Each is a focused stage check with a same-day digital report across Brisbane and the wider Brisbane City Council area.
    Handover / PCI inspection — from $660Independent final inspection of new homes under 220m² before you accept the keys; larger homes are individually quoted. Our most-booked inspection.

    Handover (PCI) Inspection FAQs — Brisbane

    Do you inspect knock-down rebuilds and townhouses?

    Yes. Any new residential build in Brisbane.

    What's a practical completion certificate, and is it the same as your inspection?

    No. The builder or certifier issues the certificate to say the home is complete. Our inspection is independent and checks the work against the QBCC Standards and Tolerances Guide before you accept it.

    How quickly do I get the report?

    It's sent to you on site, before we leave.

    What does it cost?

    $660 for homes under 220 square metres. Larger homes are quoted.

    What if my builder disagrees with an item?

    Every item cites the QBCC, NCC or AS clause, so the conversation is about the rule, not opinions. We can attend a 2nd PCI to confirm the fixes.

    Your inspector

    Your Brisbane inspection is carried out by a VG Inspect builder-inspector — a QBCC-licensed builder who inspects new builds full-time. Every VG Inspect inspector is a builder first and holds their own QBCC licence, and every report is checked before it's sent. You can verify any licence on the QBCC online licence search. VG Inspect holds a 5.0 rating across over 100 verified reviews and is fully insured.

    Book your Brisbane handover (pci) inspection

    Give us the date as early as you can — builders often give short notice. Same-day report.

    Book an Inspection
    Call Book